K9 Bathing Spa

Description

K9 Bathing Spa

A faster, easier and more efficient way to bathe.

The K9 Bathing Spa takes the work out of bath time by continuously circulating shampoo and water through the coat. Instead of pre-wetting and repeatedly working shampoo into the coat by hand, simply add water and shampoo to the tub and let the K9 Bathing Spa do the work.

The pump draws the shampoo and water mixture from the tub and sends it through the 6-foot hose and adjustable nozzle, allowing you to work the solution deep into the coat and down to the skin. The mixture then returns to the tub and continues circulating throughout the bath.

The result? Less shampoo, less scrubbing, less time in the tub and a thorough clean.

Save on Shampoo

A little shampoo goes a long way with the K9 Bathing Spa. For an average medium-sized dog, you may need only about 1 ounce of shampoo for a bath. Because the shampoo and water mixture is continuously circulated through the coat, you’re able to make better use of your products instead of watching shampoo wash straight down the drain.

Actual shampoo and water amounts will vary depending on the dog’s size, coat type and the products being used.

No Pre-Wetting Needed

Skip a step. With the K9 Bathing Spa, you don’t need to pre-wet the coat before adding shampoo. Add water and shampoo to the tub, turn on the system and begin bathing.

This can help shorten bath time—especially helpful in busy grooming salons and for pets that would rather spend less time in the tub.

Get Deep Into Thick Coats

The K9 Bathing Spa is especially useful for desheds, double coats and thick-coated dogs. The circulating water and shampoo help work through dense coat and reach down toward the skin while helping loosen dirt, buildup and shedding hair.

But it isn’t just for heavy coats. The adjustable nozzle lets you control the flow, making the system useful for dogs and cats of virtually any size and coat type.

Hands-Free On/Off Control

The included foot pedal allows you to turn the pump on and off without having to stop what you’re doing with your hands. Keep control of the pet and your bathing process while operating the system with your foot.

Shampoo AND Conditioner

The K9 Bathing Spa isn’t limited to shampoo. It can also be used to circulate conditioner, helping distribute product throughout the coat.

Fits Most Grooming Tubs

The K9 Bathing Spa works with most standard grooming tubs and can even be used in a standard household bathtub, making it useful for professional grooming salons as well as at-home bathing setups.

What’s Included

Your K9 Bathing Spa comes complete with:

• Pump
• 6-foot hose
• Adjustable nozzle
• Foot pedal for hands-free on/off operation
• GFCI plug

IMPORTANT: Maintaining the Correct Water Level

The pump requires at least 1 inch of standing water in the tub to operate properly.

The amount of water you’ll need throughout the bath will depend on the size and coat of the pet. Thick or absorbent coats can hold a surprising amount of the water and shampoo mixture.

As the mixture is pumped from the tub and onto the coat, watch the water level around the pump. If much of the water is being held in the dog’s coat and there is no longer enough standing water in the tub, simply add more water until the pump has at least 1 inch of water around it again.

Maintaining the proper water level helps keep the system circulating and operating correctly.

Care & Maintenance

Remove accumulated hair and debris from the pump regularly to help maintain proper water flow and keep your K9 Bathing Spa performing as it should. Running clean water through the pump when done bathing is a great idea to keep bacteria build-up down as well.

Electrical Use

Always use the included GFCI plug and plug the system into the GFCI. Do not plug the 110V pump cord directly into the wall outlet.

Warranty

The pump is covered by a 90-day warranty. The warranty applies to the pump only.